REJEX FOR BOATS FREE

Its high pressure spray enables it to reach hard-to-get-to trouble spots. Its clinging foam permits long-lasting contact with irregular, as well as plain, surfaces to be cleaned. 5 Star Foam was designed specially for hard to remove grease and soil unaffected by other cleaners. It can also be used on vinyl, leatherette, plastic, sinks, enameled, varnished and similar surfaces. On aircraft exteriors, 5 Star Foam will effectively clean carbon exhaust, oil and bugs. Abrasive cleaners, polishes, rubbing compounds and some chemical paint strippers can remove RejeX.MULTI-SURFACE INTERIOR / EXTERIOR SPRAY AND WIPE FOAMING CLEANERĥ Star Foam™ rates as the absolute finest foaming cleaner in the industry! 5 Star Foam is for use on interior smudge marks, nicotine stains, oily fingerprints and food stains. If a RejeX-treated surface needs repainting, normal paint preparation is all that's required. and waxes will have dificulty adhearing to RejeX! As already stated, RejeX leaves a shinier, longer-lasting finish than wax. RejeX can be used over existing wax however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. RejeX has a higher refractive index than waxes, so it produces richer, deeper looking colors and a lustrous long-lasting finish. RejeX can be applied in multiple coats, allowing 8 hours curing time between coats for deeper color and greater depth of gloss.

RejeX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches. Rejex Protects And Beautifies Painted Metal, Glass, Acrylic, Gel Coat, Fiberglass, Glossy Plastic & Polished Metal Surfaces RejeX can last for well over a year, but for optimum protection, reapply every 4-6 months or as needed. Allow RejeX to cure for 8-12 hours where it won't be exposed to contaminants such as oil, fuel, soot, hard water, tree sap, cleaners, etc. Unlike waxes that require strenuous rubbing or buffing to remove, RejeX wipes on and off easily. After RejeX dries to a haze (about 20 minutes), simply wipe it off. Avoid applying direct sunlight especially in temperatures greater than 85° F. Shake well and apply to a clean, dry surface that is cool to the touch. If the surface is too hot, the coating can cure before it has properly bonded to the surface, so it may not perform up to its potential. When over 85° F, be sure to apply RejeX out of direct sunlight. Ideally, RejeX should be applied to a cool, dry, clean surface.

REJEX FOR BOATS FREE

RejeX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting. It's easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months. It also makes graffiti easy to remove and can be applied to windshields to repel rain. This very thin film - less than a micron thick - prevents stains and adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc. RejeX is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all kinds. Space Age Protection For Your Car, Truck, Boat, Rv, Airplane & Motorcycle

Rejex for boats